NEW PRODUCTS

This list is a comprehensive collection of product announcements provided by companies. You may search for specific product information or browse to stay updated.

You are viewing products related to: Screw Machines - Single-Spindle

PUBLISHED: 4/25/2005

Small Turning Lathes

The ZV CNC gang tool lathe joins a family of gang tool machines from 27 mm to 60 mm along with a group of CNC Swiss CNC lathes. According to the company, the vertical design offers easier operation interface and facilitates tooling setups, and chang...


PUBLISHED: 4/5/2005

Lathe With C-Axis

SNK's Prodigy GT-27 gang tool lathe features C-axis spindle, a polymer base and precision components for fast and accurate small parts turning. The lathe uses three axes of motion that can be commanded in absolute or incremental modes. The C-axis...


PUBLISHED: 4/1/2005

Full CNC System For Brown & Sharpe

The ServoCamUltraTurn system provides full CNC control of the spindle and all tool slides, virtually eliminating the need to change cams or gears. Systems are available for all #2 or #3 Ultramatics, including standard and Ram-Slide Ultramatics, CNC...


PUBLISHED: 3/11/2005

Single-Spindle CNC Machining

This single-spindle CNC offers single-point threading, spindle indexing, rigid tapping, fully CNC controlled with Mitsubishi technology. It has an eight-station turret with indexing less than 1 second. The spindle offers infinitely variable speeds...


PUBLISHED: 3/10/2005

Turning Center With CNC Accuracy

Ergomat's lines of TBA and TDA machines introduce CNC accuracy, speed and ease to the multiple slide design. This union results in machines capable of fast production, but with CNC setup and operation. The TBC line is a turning center with a spind...


PUBLISHED: 3/7/2005

Twin-Spindle, Gang Tool Lathe

The GS-04T, twin spindle gang lathe is capable of independent machining of 1st and 2nd operations. The advance design of this machine can be configured for both bar feed and gantry-loaded operations. Spindle roundness, positioning accuracy and rep...


PUBLISHED: 1/7/2005

High-Volume Bar Machine

The Romi CNC 30 G is a bar machine with hydraulic collet chuck and automatic parts unloading, as well as a “U” shaped cross slide gang tooling with “T” slots for toolholder positioning, allowing flexibility for tool setup for multiple applications. ...


PUBLISHED: 11/16/2004

Linear Drive Automatic Lathes

The automatic lathes of the DMG Sprint Linear Series are designed for smaller to medium-sized batches of short-turned parts with up to a 1. 65" diameter. The machines increased dynamics with accelerations of up to 1 g and higher rapid traverse spee...


PUBLISHED: 11/15/2004

Gang-Tool Turning Center

The new Mini Lathe has a small footprint (5. 5' × 4. 5') and is a gang-tool turning center designed to fit into the tightest spaces of a machine shop.


PUBLISHED: 8/13/2004

Gang Tool Lathe With Polymer Base

The Prodigy GT-27 gang tool lathe features a polymer composite base that resists oxidants and thermal distortion and provides vibration resistance, quality part surface finish and long tool life. The capability to index in 1-degree increments allow...


RSS RSS  |  Atom Atom