D-Greeze 500-LO Non-Hazardous Degreaser/Cleaner for All Metals
Appears in Print as: 'Non-Hazardous Degreaser/Cleaner Safe Most Metals and Cleaning Equipment'
Unlike aqueous and many other non-hazardous cleaners, the solvent does not compromise performance for safety.
Edited by Angela Osborne
D-Greeze 500-LO's aggressive cleaning action penetrates, dissolves, and removes lubricating oils, grease, cosmolin, adhesive deposits and other contaminants. Photo Credit: Solvent Kleene
Solvent-Kleene’s D-Greeze 500-LO is a non-hazardous cleaner that cleans quickly at room temperature. According to the manufacturer, it outperforms trichloroethane. Unlike aqueous and many other non-hazardous cleaners, the solvent does not compromise performance for safety. It can be used in most existing equipment, including immersion tanks, ultrasonic systems and parts washers with little or no modification.
The solvent is suitable for use with all ferrous as well as nonferrous metals, including sensitive metals such as aluminum, titanium, brass and magnesium, and lasts 2½ times longer than a chlorinated solvent, the company says.
D-Greeze 500-LO’s aggressive cleaning action penetrates, dissolves and removes lubricating oils, grease, cosmolin, adhesive deposits and other contaminants. With its low surface tension, low viscosity and said to be superior cleaning properties, the cleaning fluid is said to quickly penetrate and clean small orifice openings, blind holes and other difficult-to-clean surfaces.
Because it is designed to dissolve, emulsify and remove oils and greases without allowing the oils to surface when parts are removed from a tank they are not recontaminated.
Best degreasing cleaning results are achieved by total immersion and agitation. Because D-Greeze 500-LO cavitates very well, it is suitable for use in ultrasonic equipment without the use of heat. For quick drying requirements, the cleaner can be mechanically dried in seconds by air blow-off, leaving parts dry, spotlessly clean and residue free. The drying should take place in an enclosed, ventilated chamber and the stripped-off liquid collected for reuse.
RELATED CONTENT
-
Cleaning Parts Cost Effectively
A shop should look at all aspects of the production process to maximize productivity. This includes selecting an efficient cleaning system.
-
A Primer On Parts Washing—Here’s How To Get Your Parts Really Clean
Cleaning is loosely defined as the process of removing unwanted contaminants or dirt from a surface. It does not alter the surface physically or chemically. A properly cleaned surface is just the same as it was prior to cleaning, except it is missing the dirt.
-
The Best Technical Cleanliness Practices for ISO 16232
The aim is to assess and compare the technical cleanliness of parts produced by different manufacturers or at different locations.