Webinar: New Cleaning Methods for Alternative Manufacturing Processes
Tyler Wheeler, product line manager at Ecoclean Group, covered the current manufacturing trends and how cleaning technologies are evolving to keep up with the cleaning demands of these trends.
Keeping abreast of manufacturing trends can be difficult and overwhelming. But when they are explained in detail in a 50-minute webinar that can be accessed any time and any place, it’s often a good idea to take advantage of the information in this easy format.
Ecoclean Group recently presented “New Cleaning Technologies Developed to Address New Manufacturing Processes” as part of the 2020 Parts Cleaning Conference on IMTS Spark. Tyler Wheeler, product line manager at Ecoclean, covered the current manufacturing trends
Trends and technologies driving change in the manufacturing sector is one of the main points Tyler Wheeler of Ecoclean Group mentioned in the first session in the 2020 Parts Cleaning Conference series on IMTS Spark.
and how cleaning technologies are evolving to keep up with the cleaning demands of these trends. He explained that with the development of additive manufacturing as well as the use of bonding and coatings the cleaning industry has had to adjust processes to fulfill cleaning requirements.
Here are some of the major points Wheeler makes during the presentation:
- The causes of these manufacturing trends
- Additive manufacturing cleanliness, including powder removal
- Surface cleaning with steam
- Wet and plasma cleaning for bonding and coatings
- Roughing, eroding and decoding
- Laser cleaning and surface preparation
- Cleaning electronics with carbon dioxide
- Cleaning with air
- Combination cleaning for different applications
Register for this IMTS Spark session here, along with other Parts Cleaning Conference sessions held throughout the month of October. Once registered, you can watch the webinars on demand, any time after the live presentations. Enjoy!