4 Questions About Cobot Integration
Many shops appreciate that cobots are easy to program and enable collaborative operation, but there might still be questions about how to install them.
#techbrief #basics
Laser Technology "Turns" into a Turning Tool
This new technology uses a laser to act as a cutting tool to "turn" parts from solid barstock. This high-speed precision turning machine is especially useful for micromachining, enabling high accuracy for small, complex parts that are often delicate and difficult to machine when implementing conventional turning processes.
#techbrief #micromachining #horizontal-and-vertical-lathes
Optimize Minimum Quantity Lubrication Control Through a CNC Program
Minimum quantity lubrication (MQL) on a lathe offers many benefits when implemented properly. MQL becomes more of an asset when lubricant and air delivery can be controlled from a CNC program.
#techbrief #metalworkingfluids #horizontal-and-vertical-lathes
Profilometer Choices
Learn the difference between skidded and skidless profilometers that can be used to measure the surface roughness of machined parts.
#techbrief
Heat’s Impact on Parts Cleaning
Thermal dynamics is important for assisting in the cleaning of a part. Adding heat or energy influences the cleaning process through its impact on chemistry, the water within the washer and its effect on drying.
#techbrief
Measure 3D Parts Without Losing Time
This high-speed metrology and inspection system is said to process complex geometries faster than traditional inspection methods.
#techbrief
A New Way to Collect and Sort Parts for CNC Machine Tools
This automated parts carousel not only catches and collects parts from a machine but also sorts the parts in bins attached to a rotating table.
#techbrief
Considerations for Bringing Passivation In House
If passivation is often required by your customers, moving this process in house can save time and money. However, it involves proper chemical handling and safety, compliance, equipment design and setup, and budget.
#techbrief
Network Quickly Connects Machine Shops with Repair Estimates
This network connects service requesters to service providers and can be a fast way for a machine shop of any size to quickly compare estimates.
#techbrief
Benefits of Renting or Leasing an Industrial Robot
Choosing a robot rental or leasing plan might be a wise business decision compared with purchasing a robot outright.
#techbrief
Fast Fixturing for Inspection and Laser Marking
The versatility of the Inspection Arsenal and Laser Arsenal modular fixture plate systems enables fixturing to be built on the individual grid plates. The plates can be easily removed from the magnetic docking rail when not needed.
#techbrief
Automated Hard Turning, Grinding on One Platform
This inverted vertical turning machine can perform hard turning and grinding of chucked components such as gears while loading and unloading material and completed parts itself.
#techbrief #horizontal-and-vertical-lathes
Exploring the Benefits of Reaming for Finishing Bores
How does reaming compare to single-point boring? A supplier of reaming tools compares these processes commonly used to finish bores and offers tips for those considering reaming.
#techbrief
Cobots Gain Ability to Sort and Measure
New tooling that includes a precision robotic caliper extends the applicability of collaborative robots to perform sorting and measuring small parts.
#techbrief
Improve Energy Savings and Efficiency with Vector Kinematics
The rocking, rotational nozzle movement performed by vector kinematics spray cleaning technology combined with temperature and cleaning additives provides an effective, fast and economical parts cleaning process.
#techbrief
Proper Disinfectant Use to Prevent COVID-19’s Spread
Learning how to choose the proper disinfectant for surfaces throughout your shop and then using it as directed are keys to stopping the spread of viruses such as the novel coronavirus.
#basics #techbrief
CNC Apps You Possibly Didn’t Know You Could Benefit From
Some software capabilities go underutilized. One machine tool builder’s CNC software includes lesser-known apps that shops can leverage to their advantage.
#techbrief
High-Pressure Coolant Improves Profits and Productivity
High-pressure coolant that is efficiently applied to a cutting tool will enable faster, more precise cuts; prevent oxidation of the tooling and workpieces; and prolong the life of a cutting tool.
#techbrief
Automatically Optimize Your CNC Machining Feed Rates
New feed-rate-optimization technology can enable CAM programmers to reduce cycle times and increase tool life for milling and turning operations.
#techbrief
Electrochemical Grinding Makes a Point
A programmable pointing and material handling system used on electrochemical grinding machines can accommodate a range of needle point designs while eliminating a variety of pre- and post-process operations.
#techbrief